PMC 100Fx 100BaseFX Ethernet PMC Module 

The PMC 100Fx is a PMC Module providing a high performance ethernet controller for connection to a fibre network.  It is available in two forms,  multi-mode which has a range of up to 5 Kilometers or single mode which is capable of driving distances up to 46Km with suitable fibre.  It uses the PCnet-Fast+ and NetPHY-1 chipset from AMD and connects to the fibre via an SC connector on the PMC front panel.  ST connectors are available to special order.   This connector is angled at 34° to the module ensuring minimum bending of the attached fibre.

Key Features

• 100BASE-FX via Multi-Mode or Single Mode Fibre (Factory fit Option)
• Magic Packet™ wake up without PCI clock
• Optional Boot PROM
• Four LEDs that can be programmed to indicate link status and activity

Link status

Full duplex

Rx

Tx

• 32 bit PCI from DC to 33MHz
• PCI 2.2 Compliant
• Supports 5.0V or 3.3V PCI Signalling Environments

Optical

Multi-mode
Wavelength	1330nm	Typ
Output	-19dBm	Min (0.275NA 62.5/125 mm fibre)
4 to 5 Km length depending on cable

Single Mode
Wavelength	1300nm	Typ
Output	-19dBm	Min (9/125mm fibre) Cat 1
	-8dBm	Min (9/125mm fibre) Extended range

• Up to 46Km with extended range
• Meets Class 1 Laser safety requirements

Power Consumption (Typical)

• 3.3V 180mA
• 5V 520mA,  220mA with tranceiver disabled
• +12V None
• -12V None

Operating Temperature

• 0°C to 70°C
• -5°C to +85°C special order
• 85% Relative Humidity